31001104, Клеммная колодка типа провод к плате, 5 мм, 4 вывод(-ов), 22 AWG, 14 AWG, 2 мм², Винт

Разъемы\Клеммные Колодки и Аксессуары\Клеммные Колодки типа Провод-платаThe 31001104 from Metz Connect is RT015xxHDWC (Type 001) grey colour screw type solderable terminal block with 4 poles. It has 5mm centreline pitch and 90° direction of connection. It has extended wiring UL (wire range extended to number 30AWG for factory wiring. Two same size wires number 22-18AWG Cu Sol/Str for field wiring, number 30-18 Cu Sol/Str factory wiring), cRJUS (300V / 15A / 22 to 14AWG), SEV (130V / 17.5A / T60) approvals. • Wire protector, fittable without loss of poles• 0.4Nm (UL), 3.5lb-in (SEV) tightening torque, M3 screw thread, Sn wire protector surface• PA66 insulating material (class CTI 600), CuZn terminal body material, Ni + Sn terminal body surface• Rated wiring solid wire range from 0.34mm² to 2mm²• Rated wiring stranded wire range from 0.34mm² to 2mm²• Clearance and creepage distances is 2.6mm, solder pin length is 3.8mm• IP 10 protection category according to IEC 60529, minimum insulation strip length is 6mm• Lower limit temperature is -40°C, upper limit temperature is 105°C• Overvoltage category III, pollution degree 3, 63V rated voltage, 2.5KV rated test voltage• 0.9mm solder pin dimension, 1.3mm recommended PC board hole diameter