HSC200100RJ, Резистор, винт, 100 Ом, Серия HSC, 200 Вт, ± 5%, Штырь с Резьбой, 1.9 кВ
В избранноеВ сравнение
- Обзор
- Характеристики
- Отзывы (0)
- Реквизиты
Пассивные Компоненты\Резисторы - Фиксированное Значение\Резисторы - Монтаж в Панель / КаркасThe HS series from CGS - TE Connectivity are aluminium housed power resistors. They are extremely stable, high quality wire wound resistors capable of dissipating high power in a limited space with relatively low surface temperature. The power is rapidly dissipated as heat through the aluminium housing to a specified heatsink. The resistors are made from quality materials for optimum reliability and stability. The HS series aluminium housed power resistors are suitable for general-purpose use, power supplies, power generation and traction industry. Typical applications include braking resistor, balancing resistor, capacitor charging & discharging, crowbar, filter, electrical machinery general use and available through distribution.
• Resistance value ranges from 0.01ohm to 100Kohm• Power rating range from 5W to 300W and working voltage range from 160V to 2500V• Available in single opposing mounting feet/ one side flange/ two sides flange mounting styles• ±10%, ±5%, ±3%, ±2%, ±1%, ±0.5% and ±0.25% tolerance• Proven reliability and versatile product• Low resistance, low inductance and higher voltage versions available• Minimum insulation resistance is 10.000Mohm (dry), 1000Mohm (after moisture test)• Temperature coefficient is 50ppm/°C (below 100R), 30ppm/°C ( above 100R)• High voltage, high power resistor
0.0
общая оценка
Всего 0 отзывов
Отзывов нет


















