ADCMP392ARZ, Аналоговый компаратор, Низкая Мощность, 2 Компаратора, 4.7 мкс, 2.3В до 5.5В, NSOIC, 8 вывод(-ов)

Полупроводники - Микросхемы\Усилители и Компараторы\КомпараторыADCMP392 is a dual rail-to-rail input, low power comparator with known power-up state ideal for use in general-purpose applications. This comparator operates from a single supply voltage of 2.3V to 5.5V and draw a minimal amount of current. This consumes only 22.1µA of supply current. The low voltage and low current operation of this device makes it ideal for battery-powered systems. The comparator features a common-mode input voltage range of 200mV beyond rails, an offset voltage of 1mV typical across the full common-mode range, and a UVLO monitor. In addition, the design of the comparators allows a defined output state upon power-up, a logic low output while the supply voltage is less than the UVLO threshold. Typical applications are battery management/monitoring, power supply detection, window comparators, threshold detectors/discriminators, microprocessor systems. • Common-mode input range from -200 to VCC + 200mV (VCC=2.3V to 5.5V, TA=-40°C to +125°C)• Input offset voltage is 2.5mV max (INx+=INx-=1V, VCC=2.3V to 5.5V, TA=-40°C to +125°C)• Input offset current is 10nA (VCMR=-50mV to VCC + 50mV, VCC=2.3 V to 5.5 V, TA=-40°C to +125°C)• Input bias current is ±30nA (INx+=INx-=1V, VCC=2.3V to 5.5V, TA=-40°C to +125°C)• Output low voltage is 0.3V (VCC=2.3V, ISINK=2.5mA, VCC=2.3V to 5.5V, TA=-40°C to +125°C)• Power supply rejection ratio is 80dB typ (VCC=2.3V to 5.5V, TA=-40°C to +125°C)• Input bias current is ±30nA (INx+=INx-=1V, VCC=2.3 V to 5.5 V, TA=-40°C to +125°C)• 8-lead standard small outline package• Temperature rating range from -40°C to +125°C