Сравнение

• Все характеристики
• Различные
• Очистить список сравнения

	AS7805AT-E1	ADG408BRUZ
Цена	0 ₽	2 560 ₽
Информация о производителе	—	—
Основные	—	—
number of outputs	1	1
minimum operating temperature	-40В°C	—
maximum operating temperature	125В°C	—
output type	Fixed	—
factory pack quantity: factory pack quantity:	1000	—
input voltage, max:	25 V	—
input voltage, min:	7.5 V	—
load regulation:	20 mV	—
manufacturer:	Diodes Incorporated	—
maximum operating temperature:	+125 C	—
minimum operating temperature:	-40 C	—
mounting style:	Through Hole	—
number of outputs:	1 Output	—
product category:	Linear Voltage Regulators	—
product type:	Linear Voltage Regulators	—
series:	AS7805	—
subcategory:	PMIC-Power Management ICs	—
packaging:	Tube	—
output voltage	5V	—
output current	1A	—
Вес и габариты	—	—
output current:	1 A	—
output voltage:	5 V	—
output type:	Fixed	—
output configuration	Positive	—
input voltage max	25V	—
quiescent current	6mA	—
quiescent current:	6 mA	—
polarity:	Positive	—
voltage dropout (max)	2V @ 1A(typ)	—
psrr / ripple rejection - typ	70dB(120Hz)	—
line regulation:	25 mV	—
psrr / ripple rejection - typ:	70 dB	—
package / case:	TO-220-3	—
вес, г	—	0.137
type	—	Analog Multiplexer
package type	—	TSSOP
pin count	—	16
packaging	—	Rail/Tube
mounting	—	surface mount
number of inputs	—	8
number of channels	—	1
special features	—	BREAK-BEFORE-MAKE
input signal type	—	Single
high level output current	—	20(mA)
chip enable signals	—	Yes
power dissipation	—	0.45(W)
output signal type	—	Single
supply current	—	2 �15V mA
operating temp range	—	-40C to 85C
operating temperature classification	—	Industrial
rad hardened	—	No
analog switch on resistance	—	'100±15V(ohm)
analog switch turn off time	—	60(Typ)12V(ns)
analog switch turn on time	—	'150±15V(ns)
dual supply voltage (max)	—	'±16.5(V)
dual supply voltage (min)	—	'±13.5(V)
dual supply voltage (typ)	—	'±15(V)
multiplexer configuration	—	Single 8
power supply requirement	—	Single/Dual
single supply voltage (max)	—	13.2(V)
single supply voltage (min)	—	10.8(V)
single supply voltage (typ)	—	12(V)
switch control logic	—	NOT REQUIRED
switch normal position	—	NOT REQUIRED